ktpolew.blogg.se - Raspberry pi zero camera cable installation

With the black marker facing away from the lens, slide the ribbon cable carefully into the connector.

Use the orange ribbon cable with black markers.

Repeat the procedure with the CSI connector on the Raspberry Pi making sure the blue ribbon cable marker faces towards the USB ports.

Close the connector by pushing the tabs back into place.

With the blue marker facing away from the lens, slide the ribbon cable carefully into the connector.

On the camera module, pull up the ends of the CSI connector tab.

Use the white ribbon cable with blue markers.

Separate ribbon cables for both types are included.Įnsure the Raspberry Pi is powered off before installing the camera. ApplicationsĦ0mm x 11.The camera module connects via a ribbon cable to the CSI connector on the Raspberry Pi or Pi Zero. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras.

It attaches to Raspberry Pi Zero by way of the small sockets on the board upper surface. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30. The sensor itself has a native resolution of 5 megapixel, and has a fixed focus lens onboard. This bus travels along the ribbon cable that attaches the camera board to the Pi. The camera is connected to the BCM2835 processor on the Pi Zero via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor. It connects to Raspberry Pi Zero by way of a short ribbon cable.

The neck width of the camera module is 6mm, this highlight making it perfect for endoscope, spy surveillance or other applications where size and image quality are important. The board itself is tiny, at around 60mm x 11.5mm. In order to meet the increasing need of Raspberry Pi Zero compatible camera modules, the Arducam team now released another add-on spy camera module which is fully compatible with Raspberry Pi Zero and Pi compute module.